number : rd-sdRJL-001 date :2003/08/13 -cl(rev:3) single 10/100 base-tx filtered connector module model no. : RJL-001 features fully shielded magnetics protect data fr om internally generated digital noise reduces the overall length of the signal path for improved common mode performance implements full common mode termination sc heme with used and unused twisted pairs meets ieee802.3 baseline wander compensation specification integrates high voltage ca pacitor to chassis ground supports all major transceivers with matche d turns ration and comp lete integration of specified termination design for 100base-tx transm ission over utp-5 cable operating temp range:-40 to +85 storage temp range:-55 to +125 primary ocl inductance:350uh min at 100khz/0.1vrms with 8ma dc bias. with the led lamp. typical performance characteristics insertion loss (db max) return loss (db min @100 ? ) differential to common mode rejection (db min) cross talk (db min) cmrr (db min) isolation voltage (vrms min) mhz mhz mhz mhz mhz 0.3~100 100~125 0.5~40 60 80 100 0.3~100 20 40 60 80 100 0.3~100 -0.8 -1.2 -18 -14.5 -12 -10 -35 -47 -40 -37 -35 -33 -30 1500 schematic design on mdi interface circuitry taimag usa 55 charles drive tewksbury ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.taimagusa.com
number : rd-sdRJL-001 date :2003/08/13 -cl(rev:3) mechanical specifications recommended p.c.b layout component side of board mm taimag usa 55 charles drive tewksbury ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.taimagusa.com
number : rd-sdRJL-001 date :2003/08/13 -cl(rev:3) series no. ordering information requirements 1. design and construction product shall be of design, construction and physical dimensions specified on applicable product drawing. 2. materials and finish a. contact: rj contact : phosphor bronze, thickness=0.30mm finish : (a) contact area : 30 ?min. gold (b) solder tail area : 100 ?min. tin/lead(9:1) (c) under plating : 50 ?min. nickel over all rj joint contact : brass, thickness=0.35mm finish : 100 ?min. tin/lead(9:1) over 50 ?min. nickel led joint co ntact : brass, thickness=0.30mm finish : 100 ?min. tin/lead(9:1) over 50 ?min. nickel b. plastic part : (1) set housing : thermoplastic, pbt, black ul file no. : e130155 manufacturer : nan ya plastics corp. grade :1403g3 flame class : ul 94v-0 (2) insert : thermoplastic, pbt, black ul file no. : e130155 manufacturer : mitsui petrochemical industries grade : ch230n flame class : ul 94v-0 rj45 with led rj l 001 taimag usa 55 charles drive tewksbury ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.taimagusa.com
number : rd-sdRJL-001 date :2003/08/13 -cl(rev:3) (3) spacer : thermoplastic, pbt, black ul file no. : e130155 manufacturer : nan ya plastics corp. grade : 1403g3 flame class : ul 94v-0 c. shield material : cartridge t=0.25mm 10 ?-20 ? thick nickel over 10 ?-20 ? min thick nickel d. led lamp (a) lens color : transparent with color (b) emitted color : green & yellow (c) view angle : 65 (d) wave length : green 568nm ; yellow 585nm 3. ratings (1) voltage rating : 125 vac (2) current rating : 1.5a durability : 1000 cycles with no function damage for rj-45 . abnormalities shall be present after the test. low level contact resistance : ? r=300m ? maximum (final) the sample should be mounted in the tester and fully mated and unmated 500 times per hour at th e rate of 25mm/min. eia-364-09c. taimag usa 55 charles drive tewksbury ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://www.taimagusa.com
|
